Stramit Condeck HP® High Performance Composite Decking supplied by InfraBuild Reinforcing  is part of the Stramit Condeck HP Composite Slab System. Condeck HP® Composite Decking is ideal for floor slab construction in residential, commercial and industrial applications where an alternative material is needed for highly corrosive environments.

Manufactured from high-strength galvanized steel, Stramit Condeck HP® Composite Decking is supplied with a standard Z350 coating, hinged lapping, enclosed ribs and manufactured with no restrictions on shear studs. Stramit Condeck HP® Composite Decking is suitable for use in both steel frame and concrete frame construction, including band beam applications.

Stramit Condeck HP® Composite Decking is available in 300mm effective cover and a height of 55mm. Base thicknesses range includes 0.75mm, 0.9mm and 1.0mm.

Typical Uses

• Floor slab construction in residential, commercial and industrial applications where an alternative material is needed for highly corrosive environments
• Suitable for use in both steel frame and concrete frame construction

Features

• Manufactured from high-strength galvanized steel
• Alternative material available for highly corrosive environments
• Hinged Lapping – No need for side lap fasteners. Easier construction, plus time and cost savings
• Flat Soffit – Flush fitting panels from an attractive ceiling ready for painting
• Enclosed Ribs – No need for end closures
• Stud Flexibility – No restrictions on placement of shear studs. Allow lighter beams.
• Effective Width = 300 mm, Height = 55 mm

Relevant Standards

• AS 3600:2009 Concrete structures
• AS/NZS 1170:2002 Structural design actions
• AS 1397 Grade G550, Z350
• AS 2327.1:2003 Composite structures – Simply supported beams
• AS/NZS 4600:2005 Cold-formed steel structures
• AS 3610:1995 Formwork for concrete

To find out more about the galvanized Stramit Condeck HP® Composite Decking stocked at your local InfraBuild Reinforcing please contact your nearest bar shop.

The post Stramit Condeck HP® Composite Decking appeared first on InfraBuild.

Condeck HP® Edgeforma supplied by InfraBuild Reinforcing is part of the Stramit Condeck HP Composite Slab System. Used for Slab edging, the Edgeforma suits slabs up to 200mm.

Manufactured from high-strength galvanized steel, Condeck HP® Edgeforma is available in widths of 100–200mm and made-to-order lengths.

Typical Uses

• Floor slab construction in residential, commercial and many industrial applications

Features

• Speeds up construction of slabs
• Provides a time and money-saving solution
• Manufactured from high-strength galvanized steel
• Alternative material available for highly corrosive environments
• Hinged Lapping – No need for side lap fasteners.
• Flat Soffit – Flush fitting panels from an attractive ceiling ready for painting
• Enclosed Ribs – No need for end closures
• Stud Flexibility – No restrictions on placement of shear studs. Allow lighter beams

To find out more about the galvanized Stramit Condeck HP® Edgeforma stocked at your local InfraBuild Reinforcing please contact your nearest bar shop.

The post Stramit Condeck HP® Edgeforma appeared first on InfraBuild.

InfraBuild Reinforcing supplies BONDEK® by BlueScope Lysaght, a highly efficient, versatile and robust formwork, reinforcement and ceiling system for concrete slabs for residential, commercial and civil projects.

With a yield strength of 550 MPa, BONDEK® metal decking supplied by InfraBuild Reinforcing acts as a permanent formwork with minimal propping and requires no stripping. Fast and easy to install with excellent spanning capabilities for greater strength and less deflection, BlueScope Lysaght BONDEK® works as a composite slab saving on concrete and reinforcement costs.

BONDEK® metal decking is backed by a BlueScope Steel warranty and is available in a 590mm width and 0.60mm, 0.75mm and 1.00mm thicknesses.

Typical Uses

• Floor slab construction in residential, commercial and many industrial applications.

Features

• Superior spanning capacities for greater strength and less deflection
• Acts as permanent formwork with minimal propping
• Fast and easy to instal
• Works as composite slab
• Backed by a BlueScope Steel warranty
• Galvanized

Relevant Standards

• AS 3600:2009 Concrete structures
• AS/NZS 1170:2002 Structural design actions
• AS 1397 Grade G550, Z350
• AS 2327.1:2003 Composite structures – Simply supported beams
• AS/NZS 4600:2005 Cold-formed steel structures
• AS 3610:1995 Formwork for concrete

To find out more about the BlueScope Lysaght BONDEK® galvanized metal decking stocked at your local InfraBuild Reinforcing please contact your nearest branch.

The post BONDEK® Metal Decking Galvanized appeared first on InfraBuild.

KingFlor® supplied by InfraBuild Reinforcing is a traditional flat pan or ‘re-entrant’ steel composite formwork system that provides unmatched performance in suspended concrete slabs in residential, multi-level carparks, buildings and shopping centres.

KingFlor® Steel Composite Formwork is stronger than similar decks due to the patented ReLok corner embossments, which develops a strong mechanical interlock with concrete slabs. KingFlor® products available include RF55®, KF57 and KF70 in widths of 300mm and 600mm, and heights of 55mm, 57mm and 70mm.

Typical Uses

• Residential construction, multi-level carparks, multi-storey buildings, commercial buildings and shopping centres

Features

• Stronger composite strength
• Greater spanning capacities
• RF55® is stronger than similar decks due to the patented ReLok corner embossments. ReLok develops a strong mechanical interlock with the concrete slab
• RF55® is stronger than similar decks in positive bending and end shear due to the dovetail ribs, which resist lateral deflection

Relevant Standards

• AS 3600:2009 Concrete structures
• AS/NZS 1170:2002 Structural design actions
• AS 1397 Grade G550, Z350
• AS 2327.1:2003 Composite structures – Simply supported beams
• AS/NZS 4600:2005 Cold-formed steel structures
• AS 3610:1995 Formwork for concrete

To find out more about the KingFlor® Steel Composite Formwork stocked at your local InfraBuild Reinforcing please contact your nearest branch.

The post KingFlor® Steel Composite Formwork appeared first on InfraBuild.

InfraBuild Reinforcing supplies BONDEK®, a highly efficient, versatile and robust formwork, reinforcement and ceiling system for concrete slabs in steel reinforcement applications for residential, commercial and civil projects.

BONDEK® accessories from InfraBuild Reinforcing include poly filler strip, edge form (can be made to order), end plugs and infill strip.

Typical Uses

• Floor slab construction in residential, commercial and industrial applications

Features

• Superior spanning capacities for greater strength and less deflection
• Acts as permanent formwork with minimal propping
• Fast and easy to install
• Works as composite slab
• Galvanized

To find out more about the BONDEK® metal decking accessories stocked at your local InfraBuild Reinforcing please contact your nearest branch.

The post BONDEK® Accessories – Metal Decking appeared first on InfraBuild.