Continuous metal bar chairs supplied by InfraBuild Reinforcing are used to set reinforcing bar (rebar) and reinforcing mesh to the correct position. Plastic tipped to minimise corrosion, continuous chairs allow rapid placement and stability for steel reinforcement applications. Available in 2m lengths, continuous metal bar chairs are supplied in bags of 10 at variable heights.

Note: Plastic-tipped continuous wire bar chairs should not be used above ground within 1km of the coast.

Typical Uses

• Suspended slab, slab-on-ground with concrete blinding layer

Features

• Plastic tipped
• Continuous spacer
• Allows rapid placement and chairing
• Provides stable support for reinforcing
• Other sizes available

Relevant Standards

• AS/NZ 2425 Bar chairs in reinforced concrete – Product requirements and test methods

To find out more about the metal bar chairs stocked at your local InfraBuild Reinforcing please contact your nearest bar shop.

The post Continuous Metal Bar Chairs appeared first on InfraBuild.

Danley Plastic Bar Chairs for Tilt Wall Panels have a push-on clip mechanism to provide a strong and stable base. Plastic Bar Chairs for Tilt Wall Panels are ideal for precast and tilt-up panels and have dimples at the leg base for minimal concrete surface exposure. They’re available in heights 30–75mm and in bags of 100.

Typical Uses

• Precast and tilt-up panels

Features

• Clip on
• Dual height
• Dimples at leg base for minimal concrete surface exposure
• Strong and stable

Relevant Standards

• AS/NZS 2425:2015 Bar chairs in reinforced concrete – Product requirements and test methods

To find out more about the Danley Plastic Bar Chairs for Tilt Wall Panels stocked at your local InfraBuild Reinforcing please contact your nearest bar shop.

The post Plastic Bar Chair Tilt Wall Panel – Danley appeared first on InfraBuild.

Continuous Deck Rails supplied by InfraBuild Reinforcing are a continuous plastic bar chair that allows for rapid placement and chairing. Ideal for precast, tilt-up panels and suspended slabs, Danley Continuous Deck Rails provide strong and stable support with a plastic base to suit slab-on-ground applications. They’re available in 740mm and 750mm lengths at various heights.

Typical Uses

• BAMTEC® suspended slab, slab-on-ground   with concrete blinding layer
• Precast, Tilt-up panels

Features

• Continuous spacer
• Allows rapid placement and chairing
• Provides strong and stable support for reinforcing steel
• Minimum soffit exposure
• Plastic base to suit slab-on-ground application

Relevant Standards

• AS/NZS 2425 Bar chairs in reinforced concrete – Product requirements and test methods

To find out more about the Continuous Deck Rails stocked at your local InfraBuild Reinforcing please contact your nearest bar shop.

The post Plastic Bar Chair Continuous Deck Rails appeared first on InfraBuild.

Top hat bases supplied by InfraBuild Reinforcing serve as bases for U-Bars that support the top layer of reinforcing steel. InfraBuild Reinforcing’s top hat bases are ideal for deep raft slab construction and suit 16mm and 20mm bar sizes.

Typical uses

• Deep raft slab construction

Features

• Serves as base for U-Bars that support top layer reinforcing steel
• Sits on second layer of reinforcing steel

To find out more about the metal bar chairs stocked at your local InfraBuild Reinforcing please contact your nearest bar shop.

The post Top Hat Base – Metal Bar Chairs appeared first on InfraBuild.

Co-Packers Pile Cage Foot Plastic Bar Chairs supplied by InfraBuild Reinforcing ensure correct cover at the bottom end of the reinforcing pile cage. Load tested to exceed 500kg, Co-Packers Pile Cage Foot Plastic Bar Chairs are suitable for 16–40mm bars.

Typical Uses

• Pile cages

Features

• Provides correct cover at the bottom end of the reinforcing pile cage

To find out more about the Co-Packers Pile Cage Foot Plastic Bar Chairs stocked at your local InfraBuild Reinforcing please contact your nearest bar shop.

The post Co-Packers Pile Cage Foot – Plastic Bar Chairs appeared first on InfraBuild.

Reidbar Tilt Wall Panel Plastic Bar Chairs supplied by InfraBuild Reinforcing are designed to enable Reidbar inserts to be easily used for near face applications. Fully adjustable, Reidbar Tilt Wall Panel Plastic Bar Chairs can be used for all metric and coil thread inserts. They are suitable for panel thicknesses of 125–200mm.

Typical Uses

• Precast and tilt-up panels

Features

• Enables Reidbarinserts to be easily used in near face applications
• Fully adjustable
• Can be used for all metric and coil thread inserts with appropriate nailing plate

To find out more about the Reidbar Tilt Wall Panel Plastic Bar Chairs stocked at your local InfraBuild Reinforcing please contact your nearest branch.

The post Plastic Bar Chair Reidbar™ Tilt Wall Panel appeared first on InfraBuild.

Combination deck plastic bar chairs are spacers used to set concrete cover within suspended slabs, tilt-up and precast panels. Combination deck chairs from InfraBuild Reinforcing leave a minimal foot print and are available in dual heights  from 20mm up to 200mm.

Typical Uses

• Suspended slab and beams, tilt-up panels, precast panels and beams, slab on ground when used with base

Features

• Sets concrete cover
• Dual heights
• Corrosion-free support
• Leaves minimal foot print

Relevant Standards

• AS/NZS 2425 Bar chairs in reinforced concrete – Product requirements and test methods

To find out more about the combination deck plastic bar chairs stocked at your local InfraBuild Reinforcing please contact your nearest bar shop.

The post Plastic Bar Chair Combination Deck Chair appeared first on InfraBuild.

Co-Packers Heavy Duty Pile Wheel Plastic Bar Chairs supplied by InfraBuild Reinforcing are a circular plastic spacer for pile cages that offers a wide flange rim and rigid spoke wheel to minimise skew action. They are suitable for different bar sizes and features a push fit for ease of installation.  Co-Packers Heavy Duty Pile Wheel Plastic Bar Chairs, with 50 to 100mm Cover, meet the requirements of AS/NZS 2425:2015 – Bar chairs in reinforced concrete – Product requirements and test methods.

Typical Uses

• Pile cages

Features

• Circular plastic spacer
• Provides perimeter cover
• Push fit for ease of installation
• Wider flange rim and rigid spoke wheel to minimise skew action
• Suits different bar sizes.

Relevant Standards

• AS/NZS 2425 Bar chairs in reinforced concrete – Product requirements and test methods

To find out more about the Co-Packers products stocked at your local InfraBuild Reinforcing please contact your nearest branch.

The post Co-Packers Heavy Duty Pile Wheel appeared first on InfraBuild.

Max Frank Fibre Concrete Square Bar supplied by InfraBuild Reinforcing is suitable for horizontal reinforcement and is available in 50mm and 70mm cover and lengths of 330mm and 1000mm.

Typical Uses

• Steel reinforcement applications

Features

• Continuous spacer for ease of steel fixing

Relevant Standards

• AS/NZS 2425 Bar chairs in reinforced concrete – Product requirements and test methods

To find out more about the range of Max Frank Fibre Concrete Square Bar stocked at your local InfraBuild Reinforcing please contact your nearest branch.

The post Max Frank Fibre Concrete Square Bar appeared first on InfraBuild.

Max Frank Fibre Concrete Banana Bars supplied by InfraBuild Reinforcing are suitable for rapid and cost-effective fixing of mesh reinforcement and rod reinforcement. Featuring a stable and non-tipping design in a curved shape for stability, Max Frank Fibre Concrete Banana Bars supplied by InfraBuild Reinforcing are suitable for horizontal reinforcement. They are available in 35mm, 50mm and 75mm heights and lengths of 330mm.

Typical Uses

• Rapid and cost-effective fixing of mesh reinforcement and rod reinforcement

Features

• Curve-shaped for stability
• Other sizes are available, with longer lead times

Relevant Standards

• AS/NZS 2425 Bar chairs in reinforced concrete – Product requirements and test methods

Be sure to contact your local InfraBuild Reinforcing bar shop regarding availability of Max Frank Fibre Concrete Banana Bars as long-lead times apply.

The post Max Frank Fibre Concrete Banana N Bar appeared first on InfraBuild.

Co-Packers Pile Wheels supplied by InfraBuild Reinforcing are a polymer-based spacer that expands to bond and seal inside concrete. They are flame resistant and offer suitable compressive strength for use with concrete. They are also compliant with road authority requirements. Co-Packers Carbon Pile Wheel Plastic Bar Chairs, with 50 to 100mm Cover, meet the requirements of AS/NZS 2425:2015 – Bar chairs in reinforced concrete – Product requirements and test methods.

Typical Uses

• Compliant with road authority requirements

Features

• Expands to bond and seal inside concrete
• Flame resistant
• Suitable compressive strength for use with concrete
• Polymer-based spacer compliant with road authority requirements.

Relevant Standards

• AS/NZS 2425 Bar chairs in reinforced concrete – Product requirements and test methods.

To find out more about the Co-Packers products stocked at your local InfraBuild Reinforcing please contact your nearest bar shop.

The post Co-Packers Carbon Fibre Pile Wheel appeared first on InfraBuild.

Plastic Bar Chairs Continuous supplied by InfraBuild Reinforcing are used as a continuous spacer in civil and commercial projects. Ideal for use with BAMTEC® and suspended slabs, Continuous Chairs allow for rapid placement and chairing and are corrosion free.

They’re available in 2m lengths in 20, 25, 30, 40 and 50mm heights.

Typical Uses

• BAMTEC® suspended slab, slab-on-ground  with concrete blinding layer

Features

• Continuous spacer
• Allows rapid placement and chairing
• Provides stable support for steel reinforcing
• Ideal for structures near the coast – corrosion-free support

To find out more about the range of Plastic Bar Chairs stocked at your local InfraBuild Reinforcing please contact your nearest bar shop.

The post Plastic Bar Chair Continuous appeared first on InfraBuild.