SENTINEL® MINEMESH

Overview

SENTINEL® Coal MINEMESH

SENTINEL® Coal MINEMESH, supplied by InfraBuild is a high-tensile coal MINEMESH for strata control and ground support applications. Manufactured by the MINEMESH originators, SENTINEL® Coal is 50% stronger than standard MINEMESH, allowing for a mass reduction of 25% - 30% without sacrificing strength or performance.

Typical Uses

• Strata Control
• Ground Support

Features

• 50% stronger wire strength compared to standard MINEMESH
• Significant mass reduction compared to standard MINEMESH
• 25% reduction in transport cycles
• Environmental sustainability – SENTINEL® Coal delivers up to 25% reduction in carbon emissions in the manufacturing process.

Specifications

Related Resources

SENTINEL® MINEMESH Flyer

Read More

The post SENTINEL® MINEMESH™ appeared first on InfraBuild.

Manufactured from 100 per cent Australian steel, HANDIMESH® general purpose welded wire mesh sheets and rolls are handy for just about any steel reinforcing mesh application.

Handi and Handy sized sheets are made for people who are doing smaller jobs and don’t need full-size sheets. 

Typical Uses

• Fences
• Shelving
• Security
• Gates
• Trailers
• Guarding

Features

• Available in pre-galvanized and bright wire
• Available in sheets and rolls
• Flush cut

To find out more about the HANDIMESH® Reinforcing Mesh sheet stocked at your local InfraBuild Reinforcing please contact your nearest bar shop.

The post HANDIMESH® Sheet – Handi and Handy sized appeared first on InfraBuild.

Plain square 4 mm mesh supplied by InfraBuild Reinforcing are used in reinforced precast panels and in concrete tanks. InfraBuild Reienforcing’ plain square 4 mm mesh are available in 60 x 2.4 m rolls and 61 x 2.4 m sheets

Note: Always consult an engineer before choosing the mesh best suited for your application as using the wrong mesh size could potentially result in failure to your concrete structure.

Typical Uses

• Concrete tanks
• Precast concrete sections

Features

• Multi-purpose square mesh 
• Available in sheets and rolls

To find out more about the plain square mesh rolls stocked at your local InfraBuild Reinforcing please contact your nearest branch.

The post Plain Square 4 mm Mesh appeared first on InfraBuild.

Ribbed Square Mesh supplied by InfraBuild Reinforcing is commonly used in reinforced concrete slabs such as pavements, flooring, precast panels, warehouse and industrial shed slabs, tilt-up slabs, driveways and patio slabs.

Ribbed Square Mesh is a Class L reinforcing mesh made from 500 MPa welded ribbed wires and complies with AS/NZS 4671 Steel reinforcing materials.

Note: Always consult with an engineer before choosing the mesh best suited for your application as using the wrong mesh size could potentially result in failure to your concrete structure.

Typical Uses

• Concrete pavements
• Flooring
• Precast concrete sections
• Driveways and patios

Features

• Multi-purpose square mesh
• L grade ribbed wires welded together with equal spacing in both directions to form square apertures.

Relevant Standards

• AS/NZS 4671 Steel for the reinforcement of concrete
• AS 3600 Concrete structures
• AS 3727 Guide to residential pavements
• AS 2870 Residential slabs and footings

To find out more about the Ribbed Square Mesh stocked at your local InfraBuild Reinforcing please contact your nearest bar shop.

The post Ribbed Square Mesh appeared first on InfraBuild.

Made-to-Size (MTS) Mesh is a customised mesh manufactured by InfraBuild Reinforcing. Sheets up to 9 x 3 m are manufactured on state-of-the-art equipment. MTS Mesh minimises waste and saves time and labour by eliminating excess carrying, cutting, lapping and tying of mesh sheets. 

MTS mesh can also create construction efficiency with precast tilt-up concrete panels manufactured on site. The machine is able to offer reduced flying ends and variable wire spacing in order to maximise the efficiency of mesh use. 

Features

• Minimises waste
• Saves time and labour

Relevant Standards

• AS/NZS 4671 Steel for the reinforcement of concrete
• AS 3600 Concrete structures
• AS 3727 Guide to residential pavements 
• AS 2870 Residential slabs and footings 

To find out more about the range of steel reinforcing mesh stocked at your local InfraBuild Reinforcing please contact your nearest bar shop.

The post Made-to-Size Mesh appeared first on InfraBuild.

IRONBARK® Stockyard Reinforcing Mesh Range supplied by InfraBuild Reinforcing are a range of steel reinforcing mesh products specifically developed for rural applications including stockyards, farm gates, rural gates, infill panels, rolls of wire and accessories.

IRONBARK® Stockyard Reinforcing Mesh Sheets are stocked in galvanized and black and are available in 6 x 0.9m, 6 x 1.1m, 6 x 1.2m and 6 x 1.4m sheets.

IRONBARK® Stockyard Mesh Rolls are a versatile reinforcing mesh available in the following sizes: 30 x 0.9m, 30 x 1.1m and 60 x 1.5m.

IRONBARK® Farm Gate Infills supplied by InfraBuild Reinforcing are available in 1.1m heights and in a range of lengths from 2.35–4.65m.

Typical Uses

• Stockyards
• Farm gates and rural gates
• Farm fencing
• Infill panels

Features

• Galvanized
• 100% fire-proof and rot-proof

To find out more about the range of galvanized and black stockyard reinforcing mesh sheets stocked at your local InfraBuild Reinforcing please contact your nearest bar shop.

The post IRONBARK® Stockyard Reinforcing Mesh Range appeared first on InfraBuild.

UTEMESH® supplied by InfraBuild Reinforcing is a compact 4 x 2 m ribbed mesh that is safe and legal to transport on utes and small trucks without overhang. With improved lap efficiency across and along the sheet and reduced flying ends, UTEMESH® is also ideal for driveways, paths and smaller concreting projects. UTEMESH® Class L ribbed mesh is available in SL62, SL72 and SL82, and can be handled by one person using the correct manual handling techniques.

UTEMESH® is designed to conform to road authorities’ transport regulations. It’s now safer to handle with reduced flying ends (reduced to 2 mm). It features up to 8 per cent improved mesh cover through lap efficiency across and along the sheet.

Typical Uses

• Ideal for small sites where manoeuvrability is limited
• Flooring
• Small projects such as slabs, driveways, patios and pavements

Features

• Mesh for ute trays and small truck trays
• Versatile and lightweight
• Minimises wastage
• Legal to transport
• Easy to set up, place and tie
• Can be handled by one person (using the correct handling techniques)

Relevant Standards

• AS/NZS 4671 Steel for the reinforcement of concrete
• AS 3600 Concrete structures
• AS 3727 Guide to residential pavements
• AS 2870 Residential slabs and footings

To find out more about the Ribbed UTEMESH® for Utility Vehicles stocked at your local InfraBuild Reinforcing please contact your nearest branch.

The post Ribbed UTEMESH® for Utility Vehicles – Reinforcing Mesh appeared first on InfraBuild.

Ribbed Rectangular Mesh supplied by InfraBuild Reinforcing is a Class L mesh made from 500 MPa wire. Ribbed Rectangular Mesh is commonly used in reinforced concrete slabs such as pavements, precast panels, warehouse and industrial shed slabs, tilt-up slabs, driveways and patio slabs.

Note: Always consult with an engineer before choosing the mesh best suited for your application as using the wrong mesh size could potentially result in failure to your concrete structure.

Typical Uses

• Concrete pavements
• Flooring
• Precast concrete sections
• Suspended Flooring

FeaturesMutli-purpose rectangular mesh

• Mutli-purpose rectangular mesh
• Manufactured from L grade ribbed wires, welded together with different spacing in each direction to form rectangular apertures

Relevant Standards

• AS/NZS 4671 Steel for the reinforcement of concrete
• AS 3600 Concrete structures
• AS 3727 Guide to residential pavements
• AS 2870 Residential slabs and footings

To find out more about the Ribbed Rectangular Mesh stocked at your local InfraBuild Reinforcing please contact your nearest bar shop.

The post Ribbed Rectangular Mesh appeared first on InfraBuild.

HANDIMESH® Mesh Sheet supplied by InfraBuild Reinforcing is a versatile, general purpose welded mesh used for a wide range of steel reinforcing applications and DIY projects such as fencing, shelving, security applications, guarding, trailers and gates. HANDIMESH® supplied by InfraBuild Reinforcing is available in 26 standard galvanized and black sheet sizes ranging from 2 x 1.2m to 3 x 2.4m with special manufacture options available for variable wire spacings, wire combinations and larger sheets.

Typical Uses

• Used from simple domestic applications to commercial and industrial projects
• Ideal for pet enclosures, garden arches, security screens, wine racks, storage bins, fishpond covers, shelving, guarding, fencing, trailer enclosures
• Handi-sized sheets are ideal for small jobs requiring smaller-size sheets

Relevant Standards

• AS/NZS 4534 Zinc & Zinc/Aluminium – Alloy Coatings on Steel Wire

To find out more about the range of steel reinforcing mesh stocked at your local InfraBuild Reinforcing please contact your nearest branch.

The post HANDIMESH® Mesh Sheet – Black/Galvanized appeared first on InfraBuild.

Trench mesh reinforcing sheet supplied by InfraBuild Reinforcing is a Class L and N reinforcing mesh typically used in residential, industrial and commercial buildings to reinforce concrete footings and beams.

Trench mesh from InfraBuild Reinforcing is supplied in sheet sizes 6 x 0.2 m to 6 x 0.5 m and is available in 3, 4, 5 and 6 wire meshes (3-Bar, 4-Bar, 5-Bar and 6-Bar), as well as 8 mm, 11 mm, 12 mm and 16 mm wires.

Note: Always consult with an engineer before choosing the mesh best suited for your application as using the wrong mesh size could potentially result in failure to your concrete structure.

Typical Uses

• Residential, industrial and commercial footing trenches

Features

• Available in variety of sheet sizes and wire diameters

Associated Standards

• AS/NZS 4671 Steel for the reinforcement of concrete
• AS 3600 Concrete structures
• AS 3727 Guide to residential pavements
• AS 2870 Residential slabs and footings

To find out more about the range of steel reinforcing mesh stocked at your local InfraBuild Reinforcing please contact your nearest branch.

The post Trench Mesh Reinforcing Mesh appeared first on InfraBuild.